mediaradionet

DeWalt D25013 Information The DeWalt D25013 is a 650-watt SDS-Plus rotary hammer drill that is ideal for a variety of applications, including drilling in concrete, masonry, wood, and metal. It features a three-mode operation (hammer drilling, drilling, and chiseling), a variable speed trigger, and a reversing switch. The D25013 also has a dust sealed motor and a side handle for added comfort and control. Image of DeWalt D25013 Here is a table of the full specifications of the DeWalt D25013:

Voltcraft VC-539 Information The Voltcraft VC-539 is a digital clamp meter that measures AC and DC current, voltage, resistance, capacitance, frequency, and duty cycle. It has a CAT III 600 V safety rating, making it suitable for use in professional and industrial applications. The VC-539 features a large backlit LCD display with 4000 counts, automatic range selection, and a HOLD function to freeze the displayed measurement. It also has a bargraph display that shows the current measurement in real time. The VC-539 is powered by two AAA batteries and comes with a set of test leads, a carrying case, and a user manual. Introduction The Voltcraft VC-539 is a versatile digital clamp meter that can be used for a variety of electrical measurements. It is ideal for electricians, engineers, and hobbyists who need to measure AC and DC current, voltage, resistance, capacitance, frequency, and duty cycle. The VC-539 is also CAT III 600 V rated, making it safe for use in professional and industrial...

Hilti AG 500-7SE Information The Hilti AG 500-7SE is a 700-watt angle grinder that is designed for finishing grinding and light cutting work. It features a slim design with a 5-inch disc diameter, making it easy to maneuver in tight spaces. The variable speed control allows for fine-tuning of the RPMs for different applications, and the soft start function helps to prevent the disk from jerking when the grinder is turned on. The AG 500-7SE also comes with a dust extraction system that helps to keep the work area clean. Here is an overview of the Hilti AG 500-7SE: Power: 700 watts Disc diameter: 5 inches Variable speed control: 2,800-6,800 RPM Soft start: Yes Dust extraction system: Yes Weight: 4.4 pounds Warranty: 3 years Features:

Worx JawSaw WG320.9 Information The Worx JawSaw WG320.9 is a cordless chainsaw that is powered by a 20V MAX Lithium battery. It has a 6-inch guide bar and can cut wood up to 4 inches in diameter. The saw features an automatic chain oiler with an oil level indicator, as well as an innovative auto-tension feature that guarantees optimum chain tension at all times. The blade housing allows for safe cuts directly on the ground, and the saw is lightweight and easy to maneuver. Image of Worx JawSaw WG320.9 Here are the full specifications of the Worx JawSaw WG320.9:

Bosch GBH 18V-45 C Professional Information the information about the Bosch GBH 18V-45 C Professional: Introduction The Bosch GBH 18V-45 C Professional is a cordless rotary hammer that delivers corded performance with the freedom of a battery-powered tool. It features a brushless motor that provides up to 12.5 Joules of impact energy, making it ideal for demanding applications such as drilling and chiseling in concrete, stone, and brick. The GBH 18V-45 C is also equipped with Bosch's KickBack Control, which helps to prevent kickback accidents.

DeWalt DC390B Information The DeWalt DC390B is a 18-volt, 6-1/2-inch cordless circular saw that delivers cordless convenience without sacrificing power or performance. It features a 3,700 rpm motor for fast rip and cross cuts, a carbide tipped blade for 2x cutting capacity at 90° and 45°, and a high strength magnesium shoe and upper guard for increased durability. The saw also has a 0-50° bevel capacity for additional capacity for a multitude of applications. Specifications

Sterwins PCS 46 Information The Sterwins PCS 46 is a 1800W, 46cc petrol chainsaw that is designed for both domestic and professional use. It is powered by a powerful 46cc engine that delivers up to 1800W of power, making it capable of cutting through even the toughest of woods. The chainsaw also features a number of other features that make it a versatile and user-friendly tool, including an easy-start mechanism, a comfortable grip, and an adjustable chain tensioner. Specifications

Festool ETS 150/3 E Information The Festool ETS 150/3 E is a lightweight, powerful, and versatile eccentric sander that is perfect for a variety of finishing applications. It features a 3 mm orbital stroke for a smooth, even finish, and a variable speed control that allows you to adjust the speed to the specific task at hand. The ETS 150/3 E also has a dust extraction port that helps to keep your work area clean. Image of Festool ETS 150/3 E sander Specifications

Black & Decker EPC18 Information The Black & Decker EPC18 is a 18V cordless drill driver that is designed for light to medium duty applications. It is powered by a NiCd battery pack and has a keyless chuck that accepts bits up to 10mm in size. The drill has a variable speed trigger and a two-speed gearbox, which allows you to choose the right speed for the task at hand. It also has a built-in LED work light that helps you to see in dark areas. Image of Black & Decker EPC18 cordless drill Specifications

ORNO OR-CR-257 Information the information about the ORNO OR-CR-257 sensor: Introduction The ORNO OR-CR-257 is a ceiling-mounted PIR (Passive Infrared) sensor that can be used to automatically control lighting or other electrical devices. It has a 360-degree detection range and can detect motion up to 6 meters away. The sensor is also adjustable, so you can set the sensitivity and the time delay.

DeWalt D25330K Information the information on the DeWalt D25330K chipping hammer: Intro The DeWalt D25330K is a lightweight and compact chipping hammer that is perfect for a variety of demolition and construction tasks. It features a powerful 650-watt motor that delivers up to 3.1 joules of impact energy, making it ideal for breaking up concrete, brick, and tile. The D25330K also has a comfortable L-shaped grip that provides excellent balance and control, and a dust shroud that helps to keep the user's work area clean.

Flymo EasiCut 600XT Information The Flymo EasiCut 600XT is an electric hedge trimmer that is designed for home use. It has a 500W motor that provides enough power to trim even the most overgrown hedges. The cutting bar is 60 cm long, and the teeth are spaced 22 mm apart, which allows for a clean and precise cut. The EasiCut 600XT has a number of features that make it a safe and easy-to-use tool. The double-action safety switch prevents the trimmer from starting unless both handles are held, and the spiral-cable rewind system helps to prevent the cable from getting tangled. The trimmer also has an adjustable handlebar that allows you to reach even the tallest hedges. Here is a table of the full specifications of the Flymo EasiCut 600XT:

Husqvarna 120e Mark II Information The Husqvarna 120e Mark II is a lightweight and easy-to-use chainsaw that is perfect for homeowners who need to do occasional pruning or firewood cutting. It features a powerful X-Torq engine that is both fuel-efficient and low-emissions, as well as a Smart Start system that makes it easy to start even when it is cold. The 120e Mark II also has a number of safety features, including a low-kickback chain and a side-mounted chain tensioner. Introduction The Husqvarna 120e Mark II is a great choice for homeowners who need a reliable and easy-to-use chainsaw for occasional use. It is lightweight and easy to maneuver, making it ideal for pruning trees or cutting firewood. The 120e Mark II also features a number of safety features, making it a safe tool to use.

Extech DM220 Information The Extech DM220 is a compact, auto-ranging digital multimeter with a variety of features, including non-contact voltage detection, a built-in flashlight, and a large, high-contrast LCD display. It is small enough to fit in a pocket or toolbelt, making it ideal for electricians, technicians, and hobbyists. Image of Extech DM220 multimeter Specifications

Parkside PKO 270 B2 Information The Parkside PKO 270 B2 is a versatile air compressor that can be used for a variety of tasks, including inflating tyres, blowing up inflatable pools or balls, and powering air tools. It has a maximum pressure of 8 bar, making it suitable for most applications. Introduction The Parkside PKO 270 B2 is a powerful and versatile air compressor that is perfect for a variety of tasks. It is powered by a 1.8 kW motor, which provides plenty of power for inflating tyres, blowing up inflatables, and powering air tools. The compressor has a 24-litre tank, which provides a large amount of air storage, so you can work for longer without having to refill the tank.

Makita DHR202Z Information The Makita DHR202Z is a cordless rotary hammer drill that is powered by an 18V LXT lithium-ion battery. It features a SDS-Plus chuck, which allows for quick and easy bit changes. The drill has three modes of operation: hammer only, rotation only, and hammer plus rotation. It also has a torque limiter that protects the tool and the operator in the event of a bit jamming. Image: Specifications:

Bosch GDR 18 V-LI Professional Information the information about the Bosch GDR 18 V-LI Professional: Introduction The Bosch GDR 18 V-LI Professional is a cordless impact wrench that is designed for professional use. It is powered by a 18-volt lithium-ion battery and has a maximum torque of 180 Nm. The impact wrench is equipped with a 1/4" hex chuck and can be used for a variety of applications, including tightening and loosening screws, bolts, and nuts.

Testboy TV 293 Information Intro The Testboy TV 293 is a handheld thermal imaging camera that is easy to use and versatile. It has a wide range of applications, including electrical, mechanical, and building inspection. The TV 293 is also a valuable tool for troubleshooting and maintenance. Image

Bosch GSH 27 VC Professional Information The Bosch GSH 27 VC Professional is a powerful and versatile demolition hammer that is ideal for a wide range of applications, including breaking up concrete, masonry, and tiles. It features a high-performance motor that delivers 62 joules of impact energy and 1,000 blows per minute, making it one of the most powerful demolition hammers on the market. The GSH 27 VC Professional also features Vibration Control technology, which helps to reduce vibration and operator fatigue, making it more comfortable to use for extended periods of time. Image: Specifications:

Makita DHP456RMWX Information Introduction The Makita DHP456RMWX is a 18V cordless combi drill that is well-suited for a variety of applications, including drilling, driving, and hammering. It features a powerful motor that can handle even the toughest jobs, and a lightweight design that makes it easy to use for extended periods of time. The DHP456RMWX also comes with a number of features that make it a versatile and user-friendly tool, such as a two-speed gearbox, LED work light, and soft start function. Image

Husqvarna 560 XP Information The Husqvarna 560 XP is a high-performance chainsaw designed for professional forestry work. It features a 60cc X-Torq engine that delivers more power where it's needed, while reducing fuel consumption and emissions. The saw also has a number of innovative features that make it comfortable and easy to use, such as an adjustable oil pump, low-vibration technology, and AutoTune self-tuning system. Image of Husqvarna 560 XP chainsaw Specifications

TFA AirCO2ntrol Up 31.5010.02 Information Introduction The TFA AirCO2ntrol Up 31.5010.02 is a CO2 monitor that helps you to keep track of the air quality in your home, office, or other indoor spaces. It features a high-quality NDIR dual beam sensor that provides accurate readings of CO2 concentration, as well as room temperature and humidity. The monitor also has an alarm function that can be set to go off when CO2 levels reach a certain threshold. Image

DeWalt DCH253 Information The DeWalt DCH253 is an 18V XR cordless SDS Plus hammer drill that delivers 2.1 Joules of impact energy. It has a maximum drilling capacity of 26mm in concrete and 24mm in wood, making it ideal for a variety of applications, including drilling holes for anchors, installing electrical boxes, and chiseling away masonry. Image of DeWalt DCH253 cordless SDS Plus hammer drill Specifications

Festool PLANEX LHS-E 225 Information Intro The Festool PLANEX LHS-E 225 is a long-reach wall sander that is designed for fast and efficient sanding of large areas. It is powered by a brushless EC motor that provides long life and low noise emissions. The sander features a flexible head that allows for easy sanding in corners and along edges. It also comes with a variety of dust collection accessories to help keep your work area clean. Image

Worx WX540 Information the information about the Worx WX540: Introduction The Worx WX540 is a 12V cordless reciprocating saw and jigsaw combo tool. It is a versatile tool that can be used for a variety of cutting tasks, including wood, metal, and plastic. The WX540 is lightweight and easy to use, making it a great choice for homeowners and DIYers.

Stihl MS 290 Information The Stihl MS 290 is a powerful and versatile chainsaw that is perfect for a variety of tasks, from felling trees to limbing and bucking. It features a 56.5cc engine that produces 3.8 horsepower, making it easy to handle even the most demanding jobs. The MS 290 also features a low-kickback chain and a number of other safety features, making it a safe and reliable choice for any user. Full Specifications Engine: 56.5cc 2-stroke Horsepower: 3.8 Bar length: 16-20 inches Chain: .325" pitch, 0.050" gauge Weight: 13 pounds Fuel capacity: 21.2 ounces Oil capacity: 10.1 ounces Features